We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Materials

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a Shielding Gas?

By Lori Kilchermann
Updated: May 17, 2024
Views: 10,848
Share

A shielding gas is used during wire welding. Unlike arc welding, which uses welding rods that are covered with a flux coating, metal inert gas (MIG) and tungsten inert gas (TIG) wire welding use a shielding gas to protect the weld from contamination as it forms and cools. Typically a mix of carbon monoxide and argon gasses, the welder dispenses the proper amount of shielding gas through the welding gun as it is needed. A benefit in using a shielding gas when welding is that there is no slag left on the weld that requires chipping and cleaning like that which is found on an arc weld.

When a new wire welding machine is purchased, it does not come with a shielding gas tank. This must be purchased or rented from a gas supplier. Most welding supply stores also sell welding gasses and will be able to assist the buyer in a tank purchase. The type and mix of shielding gas required will be determined by the type of welding which will be done using the gas. For most general welding requirements, the argon gas will suffice. There are some welding situations, such as aluminum welding, that require a special mix of gas.

When welding with a shielding gas, it is important to keep the welding gun close to the work piece. The flow of gas coming from the nozzle must be kept in contact with the weld puddle. If the gas in not kept near the puddle, a weak and nonuniform weld could result. Operators should check with the manufacturer's recommendations found in the operation handbook concerning the right settings of the gas tank regulators. This will ensure a proper flow of gas throughout the welding procedure.

When welding outside in extremely windy conditions, it may be necessary to increase the flow of gas coming from the welding gun. Occasionally, the wind may blow the gas away from the weld puddle, causing contamination of the weld. This condition is rare, however, and can be corrected by keeping the welding gun a little closer to the weld puddle. It is not necessary for the shielding gas to remain focused on the weld for more than a split second as the weld is formed.

When the nozzle of the welding gun becomes fouled with weld splatter, it should be cleaned. A wire brush can be used to remove most weld splatter from the nozzle. Stubborn splatter may be picked off using a small screwdriver.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
Share
https://www.aboutmechanics.com/what-is-a-shielding-gas.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.