We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Electrical

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a PiN Diode?

M. McGee
By
Updated: May 17, 2024
Views: 9,937
Share

A PiN diode is a type of diode that contains a semiconductor with a very large intrinsic region (the ‘i’) between a smaller-than-normal positive and negative region (the ‘P’ and ‘N’). This large neutral region in the center of the semiconductor will lower the speed at which voltage moves through the system. A PiN diode is used for three basic reasons: as a radio frequency (RF) switch, as part of a photovoltaic cell and as an emergency shunt for power overloads.

A typical diode has a very small intrinsic area. Usually, diodes are composed of two connection terminals connected by a semiconductor. Diodes take in power through an anode and release it into a positively-charged area of a semiconductor. A small intrinsic layer separates the positive area from a negative region. The power moves through the intrinsic into the negative and then out through a cathode back into the device.

A PiN diode works a little differently. The power enters the diode and transfers to the positive region normally, but then it hits an extremely large intrinsic area. This area acts like a dam to the power moving through the system. It fills with more and more power as the positive area keeps sending it over. When it finally fills to the point where it simply can’t take anymore, it begins to push power into the negative zone.

These varying areas in the PiN diode semiconductor are created through a process called doping. Most semiconductors are made of silicon. When the actual semiconductor is built, the silicon is infused with a variety of metals, some of which enhance the positive system, while others enhance the negative. The intrinsic area on the PiN diode is doped very lightly if at all. This makes power rush into it and then sit while current builds up—it then rushes out.

When used as part of an RF switch, a PiN diode isolates signals. The construction on the diode allows some signal types to move through the intrinsic area more easily than others. This allows specific signals to pass through while keeping the others permanently blocked.

Photovoltaic cells require bursts of power to operate. In this case, the PiN diode blocks power from entering the system until there is a large buildup. That power is released all at once, triggering the cell.

The last common use for a PiN diode is as an emergency power shunt. When power moves through a system, a secondary offshoot may contain a PiN diode connected directly to the device’s grounding system. If the device operates normally, the intrinsic area of the PiN never fills up and, therefore, never moves power. If a surge hits the device, the intrinsic area fills, and the current moves out of the device to the ground, hopefully before the device is damaged.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
M. McGee
By M. McGee
Mark McGee is a skilled writer and communicator who excels in crafting content that resonates with diverse audiences. With a background in communication-related fields, he brings strong organizational and interpersonal skills to his writing, ensuring that his work is both informative and engaging.
Discussion Comments
M. McGee
M. McGee
Mark McGee is a skilled writer and communicator who excels in crafting content that resonates with diverse audiences....
Learn more
Share
https://www.aboutmechanics.com/what-is-a-pin-diode.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.