We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Machinery

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a Gear Ratio?

By Adam Hill
Updated: May 17, 2024
Views: 39,649
Share

A gear ratio is the relationship between the number of teeth on two gears which are meshed. This relationship is expressed mathematically. For example, if one gear with 13 teeth is driven by a gear with 21 teeth, the gear ratio is 1/1.62, or 1:1.62. Almost all types of mechanical machinery, such as vehicles, farm equipment, and industrial machines, use gears in some way, and gear ratios are used to help define the machine’s performance.

The idea of a gear ratio is based on the circumference of circles. When two gears with different circumferences are connected by teeth on the outer edge, the movement of the one is translated into greater or lesser movement by the other. If a gear with a large circumference is turning one that is only half as big, the smaller gear will spin twice as fast as the larger one. The same concept works in reverse.

Gear ratios are specifically tailored by manufacturers of engines and other machinery, to achieve a certain result. In some contexts, such as automobile transmissions, gear ratios can be varied to adapt to the car’s needs at different rates of speed. The lowest gear in a car’s transmission will have a high gear ratio, such as 2:1 or 3:1. This gives the car the ability to easily start moving from a complete stop, such as at a traffic light. However, since the engine has to make two or three revolutions for every revolution of the transmission, an engine cannot make a car in low gear go very fast.

In second gear, the gear ratio is lower, meaning that the engine does not have to work as hard to give the car additional acceleration. In the higher gears, the gear ratios get progressively lower. These are good for moderate acceleration and reducing the number of engine revolutions needed to keep the car at a comfortable cruising speed. The gears in a transmission, therefore, serve to either magnify or reduce the output of an engine, based on the car’s speed at the time.

Gears can sometimes be connected by belts or in other ways, but most are connected by teeth. This arrangement provides some distinct advantages. First, as long as none of the teeth break, there is no slippage between the gears, which would result in a loss of efficiency. They also make it possible to design exact gear ratios. Even if the circumferences of the gears are slightly imperfect, the teeth make it so that these imperfections don’t matter. Since they exactly synchronize the gears, they also give them an exact gear ratio.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
By aravindhs — On Mar 11, 2011

what is the use of finding the gear ratio?

Share
https://www.aboutmechanics.com/what-is-a-gear-ratio.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.