We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Machinery

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a Dado Blade?

By T. Raleigh
Updated: May 17, 2024
Views: 10,828
Share

A dado is as a rectangular channel cut into one board to receive the end of another. Woodworkers use different methods to achieve this type of cut, but a common choice is using a dado blade. The dado blade attaches to a table saw to cut a groove in the material to the depth and width required for the joint.

For a successful dado joint, it is important that the size of the channel be such that the material sits tightly within it. Sides of the dado joint are called the shoulders. The best joints have straight and even shoulders and a flat bottom.

While the dado is a joint itself, the blade can also create other types of joints. Lap joints and butt joints are simple variations for which a dado blade can be used. With a bit more skill and patience, more complex joints – such as mortise and tenon, and box joints – can be created as well.

One type of dado blade is a wobble style blade. The blade teeth cut from side to side in a wobbling motion to the width determined by a dial setting. While this kind of dado blade usually is less expensive, it can present challenges to making a clean dado cut on less substantial table saws. Due to the nature of its cut, it usually leaves the bottom of the dado slightly concave rather than flat, which is preferred.

Another common style used is a chipper or stacked dado blade. In this type, multiple blades along with chipper blades are placed together with shims or spacers in between each blade. Adding and removing the number of chipper blades adjusts the width of a dado cut. Cuts made with this style of dado blade usually leave the bottom more flat than wobble style blades do.

Most dado saw blades require an initial setup and adjustment. The width and depth of the dado needed is calculated and the blades configured appropriately. Many different manufacturers offer styles of dado blades, and the fine-tuning of the blades can vary between different table saws.

Woodworkers sometimes use a router to create a dado cut. Specialty bits, such as a plywood router bit, insert into the router to cut a predetermined dado. These types of cuts tend to come in specific sizes and are less flexible with the width adjustment of the dado.

Of course, there were dado cuts before there were power tools. In this method, the shoulders of a dado can be defined by a backsaw, sometimes called a tenon saw, and then a chisel removes the material from the channel. Usually, a good amount of expertise is required for using this method to make consistently accurate dado cuts.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
Share
https://www.aboutmechanics.com/what-is-a-dado-blade.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.