We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Materials

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a Corrugated Fastener?

By B. Turner
Updated: May 17, 2024
Views: 22,970
Share

A corrugated fastener is a thin strip of sheet metal that has a pattern of alternating grooves. These fasteners are typically made from 18 to 22 gauge sheets of stainless or cold-rolled steel. While they are relatively thin, the grooved shape of the corrugated fastener gives it a surprisingly high level of strength and durability.

Corrugated fasteners are available in a range of sizes, but generally fall between one and three inches (25.4 and 76.2 mm) in length. They have one sharp pointed end and one flat end that has been sawed off. Sharp ridges run down the sides of a corrugated fastener, which help it hold more securely to wood after installation.

These fasteners are a common alternative to traditional nails, screws and dowels when it comes to joining woods. They can be used at many different types of wood joints, and are one of the most common fasteners for joining mitered joints. Corrugated fasteners are used for both finish carpentry, like tables and furnishings, and rough carpentry, including components that are hidden from view. A corrugated fastener may also be used to join small or delicate pieces of timber, which may be damaged by nails or screws.

There are two basic types of corrugated fasteners available, including parallel and angled units. Parallel units have grooves running in parallel lines along the shaft. They are the most secure of the two types, and are the best choice for miter cuts or harder wood species. Angled units have grooves running at an angle to the shaft, and are less capable than parallel units for joining wood securely.

A corrugated fastener is installed by hand using a hammer. The fastener should be installed into one of the wood components first, with the fastener traveling about halfway through the thickness of the wood. The other piece of wood can then be added and hammered into place. For more delicate work, place the second piece of wood onto the fastener and alternate your hammer on the two pieces of wood to join them together a bit at a time. A corrugated fastener should never run the same direction as the wood grain, as this may split the wood.

For harder wood species, it may be too difficult to use a hammer. In this type of application, a corrugated fastener gun can be used to automatically install these fasteners. These guns can may also be used in commercial work and other large-scale projects to quickly and easily install corrugated fasteners.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
By anon355791 — On Nov 19, 2013

Is there any way to remove the fasteners once they've been pounded in?

By indigomoth — On Oct 01, 2011

@pleonasm - You know a hammer isn't the only alternative to glue if you are finding it too tricky to use with a corrugated fastener. You can actually get a power tool which is specifically designed to put fasteners in.

I really prefer to set them in the old fashioned way, rather than using glue, which as you point out, can be expensive, or unreliable. I also find it difficult to use properly. If you do a lot of work which requires fasteners a corrugated fastener tool is a good investment.

By pleonasm — On Sep 30, 2011

You get what you pay for when you are looking for the glue to fasten a corrugated fastener to your wood. I Have to admit, I tried using a cheaper kind of wood glue and it backfired on me. I ended up having to spend even more money to get the glue I should have used in the first place.

I do like the fastener itself though, and often use it instead of nails with certain kinds of projects.

Share
https://www.aboutmechanics.com/what-is-a-corrugated-fastener.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.