We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Electrical

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What is a Consumer Unit?

By Ron Davis
Updated: May 17, 2024
Views: 10,132
Share

A consumer unit is a box of breaker switches installed on the dwelling side of the electric meter. In the US, this device is commonly referred to as a residential breaker box. A consumer unit is intended to serve only one dwelling with two phase wiring. Prior to breaker switches, the box used fuses and was often called a "fuse box."

The electrical circuitry of the home is divided into separate circuits by a consumer unit. Each circuit has its own breaker switch, which is rated according to the carrying capacity of the circuit. If that capacity is exceeded, it causes a breaker switch to flip to the "off" position. Putting a switched circuit back in use requires only flipping it back to "on."

If the consumer unit is old and still using fuses, the fuse will burn out when the carrying capacity is exceeded. Rather than flipping a switch, a fuse must be replaced to restore power. All modern circuitry uses breaker switches rather than fuses because they are safer and easier for the homeowner to use.

The nuisance caused by fuses burning out led some people to bypass them by placing a copper penny behind the fuse, then screwing it in. Bypassing the fuse is a very dangerous practice, and is part of the reason that most US mortgage lenders will not lend if the consumer unit still uses fuses rather than breaker switches. The purpose of the switch box is to protect the home from overloaded circuits that could start a house fire.

Each breaker or fuse in the consumer unit will be labeled in amps. The amp rating is multiplied by the voltage to yield watts. US standard voltage is 110 volts, while most of the rest of the world uses 220 volts. A 20 amp breaker would carry 2200 watts in the US and 4400 watts where 220 volts is standard. To avoid the nuisance of flipped breakers, a homeowner should make sure the total wattage of everything to be run on that circuit is less than the carrying capacity of the circuit.

Some circuits are wired with heavier gauge, higher capacity wire to carry more electrical power. Electric ranges, dishwashers, clothes dryers, and water heaters are usually on a circuit dedicated exclusively to that use and have higher capacity wiring and breaker switches. Heavier gauge wiring is not used throughout the house because it is more expensive and beyond the needs of most devices.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
Share
https://www.aboutmechanics.com/what-is-a-consumer-unit.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.