We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Machinery

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What are the Different Types of Rebar Bending Machines?

By Ron Davis
Updated: May 17, 2024
Views: 9,333
Share

Generally speaking, there are three kinds of rebar bending machines: hand powered, hydraulic, and electro-mechanical. The simplest machines, hand-powered hickey bars, are readily available and inexpensive. Hydraulic machines are slower and shorter-lived than electro-mechanical devices, but they are also less expensive. Manufacturers of large rebar bending machines build them to customer specifications, making each machine a little different. These giants are nearly always electro-mechanical.

The task at hand determines the nature of the rebar bending machine. For occasional use on smaller diameter rebar, a hickey bar is usually the best choice because of its low cost. A hickey bar is a simple lever arm — a long steel bar — with a slot or studs for grabbing the rebar at one end. Arm strength and body weight are used to apply force to the other end of the hickey bar to bend the rebar.

For a tight bend, two hickey bars can be used. These simple rebar bending machines can be used on rebar up to 5/8 inch (1.6 cm) in diameter. Hickey bars with cutting capability are also available.

To bend more than a few pieces of rebar, an electro-mechanical or hydraulic machine is a better choice. Some of the hydraulic machines are quite portable, weighing as little as 33 lbs (15 kg), and are designed to be held by hand. These machines are designed to bend rebar left exposed after concrete has been poured over a rebar web. Bends of up to 180 degrees are possible with these machines.

When the contractor is bending rebar in preparation for installation into a mold, larger machines are usually chosen. The larger bending machines are usually transported by truck, and usually will not leave the truck bed until the rebar is in place and the machine is returned to storage. These machines run on diesel fuel, enabling them to function on work sites that have no power supply.

Even large, on-site machines can handle rebar only up to 1.18 inches (30 mm) in diameter; larger diameters must be bent off site. The most powerful multipurpose, programmable rebar bending machines are large, fixed in place, and expensive. These are generally bolted into concrete floors in industrial buildings where they do both bending and cutting. Off-site rebar bending machines often double as pipe bending machines, but even these can only create bends of 180 degrees.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
Share
https://www.aboutmechanics.com/what-are-the-different-types-of-rebar-bending-machines.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.