We are independent & ad-supported. We may earn a commission for purchases made through our links.
Advertiser Disclosure
Our website is an independent, advertising-supported platform. We provide our content free of charge to our readers, and to keep it that way, we rely on revenue generated through advertisements and affiliate partnerships. This means that when you click on certain links on our site and make a purchase, we may earn a commission. Learn more.
How We Make Money
We sustain our operations through affiliate commissions and advertising. If you click on an affiliate link and make a purchase, we may receive a commission from the merchant at no additional cost to you. We also display advertisements on our website, which help generate revenue to support our work and keep our content free for readers. Our editorial team operates independently of our advertising and affiliate partnerships to ensure that our content remains unbiased and focused on providing you with the best information and recommendations based on thorough research and honest evaluations. To remain transparent, we’ve provided a list of our current affiliate partners here.
Materials

Our Promise to you

Founded in 2002, our company has been a trusted resource for readers seeking informative and engaging content. Our dedication to quality remains unwavering—and will never change. We follow a strict editorial policy, ensuring that our content is authored by highly qualified professionals and edited by subject matter experts. This guarantees that everything we publish is objective, accurate, and trustworthy.

Over the years, we've refined our approach to cover a wide range of topics, providing readers with reliable and practical advice to enhance their knowledge and skills. That's why millions of readers turn to us each year. Join us in celebrating the joy of learning, guided by standards you can trust.

What are Locking Fasteners?

By Lori Kilchermann
Updated: May 17, 2024
Views: 9,766
Share

Locking fasteners are typically nuts that lock onto the threads of a bolt when tightened and prevent loosening. Often the nuts utilize a special thread that grips onto a bolt, but some nuts use a system that incorporates an added piece that wedges itself against an object and prevents the nut from turning until it has been removed. Certain types of locking fasteners utilize a chemical compound within the nut's threads that is heated from the friction of tightening the assembly. This heat activates the chemical, creating a glue that bonds the nut to the bolt.

The problem with nuts and bolts is that they typically loosen after being installed. Movement in the materials that they are installed in will cause the nut to back off in time. A loose bolt assembly can cause catastrophic failure in whatever it is installed in. Loose bolts can flex and break, allowing them to drop into moving parts where they break or jam a machine and cause it to lock up or seize. Once a bolt breaks, it can allow a part its holding to simply fall out of place and be damaged or lost.

Locking fasteners into place with safety wire is a time consuming method of assuring a bolt remains tight and in place. This is a procedure that works well, but it is difficult to remove the assembly in an expedient manner. Locking fasteners in place using spring lock washers has proven to fail over time and some studies show that the spring washer itself tends to loosen the nut when severe vibration is present. Modern locking fasteners prevent this from occurring and maintain the integrity of the bolt.

Lock nuts are the most common of the locking fasteners and perhaps the easiest to use. A lock nut comes in two varieties, the standard steel lock nut which uses a row of distorted threads which cause the nut to be torqued into holding when tightened, and the nylon lock nut commonly referred to as a Nylock Nut. This nut uses a nylon insert at the top of the nut that is smaller than the threads of the bolt, this nylon fixture is forced over the bolt as the nut is tightened, causing the nut to be wedged into place.

Some locking fasteners use an oblong piece of metal which fits over the hex shape of the nut and is wedged against the side of the materials being bolted together. This type of locking fastener is best suited for custom automotive exhaust and header applications. Perhaps the simplest form of the locking fasteners is a nut with a built-in washer. The washer has small teeth machined into it which cut into the material it is tightened against, thereby preventing it from backing out.

Share
About Mechanics is dedicated to providing accurate and trustworthy information. We carefully select reputable sources and employ a rigorous fact-checking process to maintain the highest standards. To learn more about our commitment to accuracy, read our editorial process.
Discussion Comments
Share
https://www.aboutmechanics.com/what-are-locking-fasteners.htm
Copy this link
About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.

About Mechanics, in your inbox

Our latest articles, guides, and more, delivered daily.